Single Bar Portable Jib Arm for cameras less than 6.5 lbs.
For those on the go, we offer the CobraCrane Backpacker. This system is the same length at the CobraCrane I (5 feet). The difference is that this package comes as two smaller pieces allowing you to break it down for easy transport. The can reach up to 8 feet above the ground (on a 5 foot Tripod) and can go as low as ground level, offering incredible performance and versatility at a very competitive price.
Breaks down to only 42" for easy transport. Tripod and counter weights are not included.
CobraCrane Backpacker
Single Bar Portable Jib Arm for cameras less than 6.5 lbs.
Breaks down to only 42" for easy transport.
Actual Length 5 feet - Length from Pivot 3 feet - Carry Weight 13 lbs.
Availability
Model
MSRP: $349.00 ON SALE:
CobraCrane Backpacker
$299.00
Specifications:
Actual Length 5 feet
Length from Pivot 3 feet
Carry Weight 13 lbs.
Breaks down to only 42" for easy transport.
Whats Included:
CobraCrane BackPacker Portable Single Arm Crane
Camera Tilt Cable and Pulley assembly
Installation Guide
The CobraCrane Backpacker is an easy to setup jib that is simple to operate, by one individual, while taking amazing footage. Bring a whole new dimension to your video productions by bring the camcorder from a low shot to a high shot smoothly and efficiently. The CobraCrane BackPacker mounts on any sturdy tripod with the CobraCrane Mounting Bracket for quick and easy set up and can shorten to 42 inch for portability. This sturdy construction elevates your camcorder up to 8 feet, and can hold a camcorder up to 6.5 pounds. The CobraCrane BackPacker is made from super durable, high strength, lightweight steel. While total height depends on tripod, the CobraCrane BackPacker gains 3 ft. above the Tripod Head and can reach up to 8 feet above the ground (on a 5 foot Tripod) and can go as low as ground level, offering incredible performance and versatility at a very competitive price.
Backpackers are used by adventure camera operators. If your job requires climbing up the mountains, hiking on the trail, shooting on the ski slopes, or use in the wild, CobraCrane Backpacker is the system for you. Need to bring a system into the wild for adventure work or outback documentaries? Our lightest system weighing in at only 13lbs, the CobraCrane Backpacker is a cinch to carry out into the field. It offers the same functionality as all the other CobraCranes, just lighter and easier to carry.
Made of the same durable aluminum rails as its big brothers, the Backpacker gives you incredible freedom of movement. Booming, swinging and tilting as well as the ability to mount a variety of cameras with simple and fast setup, Backpackers help you get that money shot virtually anywhere.
Quick Setup: CobraCranes set up in minutes - no additional tools required .
Ease of Use: With only minutes of practice, get those hard to get shots.
Flexible: Works with a wide variety of cameras and tripods.
Affordable: Most dramatic difference for the least amount of money
Reliable: Solid construction and built to last, CobraCranes are rock solid.
CobraCrane camera cranes and jibs are built with performance in mind and for more than 12 years still follow a proven design that delivers professional results.
Perfect Balance
Adding the correct counter weights to a CobraCrane avoids the need for any additional "brake" hardware. Take your hand off the crane and it will remain where you left it. No floating or travel in any direction until it's redirected once again by the operator.
Built In Tilt Mechanism
Each CobraCrane comes with a Tilt Mechanism Design allowing the operator to tilt the camera to any angle.
Included Quick Release
All CobraCranes include a industry standard quick release plate that fits most Manfrotto 501/503/504 tripod heads allowing you to use your tripod for crane shots or camera/tripod only recording.
Remove two bolts and switch to your existing release plate.
Optional Panning Kit
Simple, inexpensive, lightweight Panning Kit provides you with the ability to pan your camera 180 degrees left or right. Motorized pan/tilts are also supported on all CobraCranes.
No Additional Bearings to Buy Designed with the total camera weight in mind, There is no need to buy additional expensive bearing kits for your CobraCrane. The BackPacker series support up to 6.5 Lbs. FotoCrane series support up to 4.5 Lbs. and both will work with cameras as lite as 1 Lb.
Completeness
All CobraCranes are complete. whether you purchase a standalone CobraCrane or one of our popular Filmmaker Kits everything you need is included to match your CobraCrane purchase.
Telephone a real person
Support and factory replacement parts are a phone call away. We are glad to help and value your business.
CobraCranes are available direct or from your favorite reseller.
CobraCrane Ext. Kit I - For CobraCrane I and BackPacker Extend your CobraCrane by 3ft.
Actual Length 3 feet, Length from Pivot 3 feet, Carry Weight 7 lbs.
CobraCrane Ext. Kit I
CobraCrane Padded Bag
For all CobraCranes and Track and Dolly
Actual Length 73 in. - Empty Carry Weight 5 lbs. .
CobraCrane Padded Bag
LCD - TFT Displays
Add remote monitoring to your new CobraCrane Jib. Choose from 2.5", 7",
7" Wide or 8" HD. Each priced to fit any budget.
LCD - TFT Displays
Video Camera Dollies
Choose from our very own Track and Dolly System or Manfrotto Professional Video Dollies
Professional Video Dollies
Professional LANC Variable Zoom and Focus controllers
For Sony, Panasonic and Canon
Zoom and Focus controllers
Compliment your CobraCrane Camera Crane with a solid foundation
Manfrotto Professional Video Tripods
