|
CobraCrane
Choose from 5 to 8 and 10 foot CobraCranes |
 |
Reinforced Crane Arm Sleeves
Reinforced light weight aluminum encases the crane arm to prevent any rolling, shake or noise of the arm crane during use. A correctly configured crane with a camera load that weighs no more than the cranes rating produces smooth, fluid movement in any direction |
 |
Perfect Balance
Adding the correct counter weights to a CobraCrane avoids the need for any additional "brake" hardware. Take your hand off the crane and it will remain where you left it. No floating or travel in any direction until it's redirected once again by the operator. |
 |
Built In Tilt Mechanism
Each CobraCrane comes with a Tilt Mechanism Design allowing the operator to tilt the camera to any angle. |
 |
Included Quick Release
All CobraCranes include a industry standard quick release plate that fits most popular tripods allowing you to use your tripod for crane shots or camera/tripod only recording. |
 |
Panning Capable
Simple, inexpensive, lightweight Panning Kit provides you with the ability to pan your camera 180 degrees left or right.
Designed for camera repositioning while recording paused. - Motorized pan/tilts are also supported on all CobraCranes. |
 |
No Additional Bearings to Buy
Designed with the total camera weight in mind, There is no need to buy additional expensive bearing kits for your CobraCrane. The CobraCrane I series support up to 6.5 Lbs. CobraCrane II series support up to 20 Lbs. and both will work with cameras as lite as 1 Lb. |
 |
Completeness
All CobraCranes are complete. Weather you purchase a standalone CobraCrane or one of our popular Film-Maker Kits everything you need is included to match your CobraCrane purchase. |
 |
LNC-50 LANC Controller
Works with most LANC cameras |
 |
LANC 12ft. Cable
12' LANC Extension cable (also DVX) |
 |
CCUSA Universal Clamp
Mounting one of our LCD's is a snap with the CobraCraneUSA Mini LCD Clamp. The CobraCraneUSA Mini LCD Clamp locks and tightens to any tripod or CobraCrane. |
 |
CobraCrane Padded Bag
For all CobraCranes and Track and Dolly
Actual Length 73 in. - Empty Carry Weight 5 lbs. |
 |
Add a Optional CobraCraneUSA Certified Tripod System
Perfect for any CobraCrane. Features large die-cast alloy double hardened head with 3-way action for landscape and portraiture shooting, dual pan and tilt handles, bubble level and quick release plate. |
 |
CCUSA 7" LCD Monitor Complete Studio Kit w/ Battery Adapter
The complete 7" LCD monitor kit that includes everything you need
Detailed list bellow: |
 |
7" Widescreen
16:9 / 4:3 Selectable TFT LCD Monitor (480 x 240 lines)
| Screen Size |
7” Diagonal 16:9 AR |
| Display Type |
'Panasonic' TFT LCD Panel |
| Active Area |
6.12” (W) x 3.45” (H) |
| Resolution |
1440 x 234 pixels / 480 x 240 lines |
| Video System |
NTSC & PAL Standards Compatible (Auto detect) |
| Aspect Ratio |
16:9 & 4:3 Selectable |
| Viewing Angle |
(60° horizontal x 30° vertical) |
| Power Supply |
12v DC |
| Current |
0.7A |
| Video Input/Output |
Dual Channel RCA & BNC Video Inputs - RCA Video Loop-Out |
| Audio |
Built-in Speaker with RCA Audio Input |
| OSD Adjustments |
Brightness > Color > Contrast > Tint > Aspect Ratio |
| Mount Type |
Bottom & Rear Mount Bracket |
| Image Flip Function |
Vertical & Horizontal (Mirror Image)
Flip w/Remote 'SYS' |
| Backlight |
Cold Cathode Filament Tube |
| Brightness |
250-300cd/mSQ |
| Power Consumption |
Low Power Consumption - 12 volts Input, 10W Max |
| Operating Conditions |
32°-140° F, 85% Max Humidity |
| Weight |
0.78 lb |
| Dimensions |
7.08" (W) x 5.35" (H) x .98" (D) |
|
 |
AV Cable
Allows you to connect two video sources (RCA/BNC), one audio source (RCA) and the power source into the monitor - Now with Video Loop Out.
|
 |
Cigarette DC Adapter
12 volt DC adapter that will allow you to power the monitor through a Cigarette Lighter Plug.
|
 |
4-Pin XLR Adapter
This XLR Adapter will allow you to power the monitor from a 4-pin XLR receptacle such as an external 4-pin 12 volt battery pack or battery belt.
|
 |
Shoe Mount
Allows you to mount the monitor on the shoe on top of your camera.
|
 |
Desktop/Wall Stand
Allows you to mount the monitor on a table or wall. |
 |
Remote Control
Wirelessly control the monitors functions. |
 |
RCA Adapter
Adapter will join two RCA female ends together. Allows you to connect the monitor to your cameras video out, or join two RCA female cables together for extended length. |
 |
LCD Dust Cover
A protective cloth cover that can be stretched over the entire LCD monitor. |
 |
Sun hood
Provides shade in direct sunlight for enhanced viewing. Attaches to the monitor with included velcro strips. |
 |
Carrying Case
Protective cloth carrying case with two zippered pockets and various compartments to store and transport your monitor and accessories safely. |
| |
Choice of Battery Adapter: |
 |
Sony, Canon, Panasonic or JVC Battery Adapter
This adapter plate allows you to use a camera battery to power your monitor. Separate adapters available for Sony, Canon, Panasonic & JVC Batteries.
*Does not include battery. |
 |
or...
AA Battery Adapter with Cover
This adapter allows you to use 10 AA Batteries to power your monitor.
*Does not include batteries. |